Automotive Cable 归档 - dây nịt,dây ô tô, nhà sản xuất cáp công nghiệp

nhà sản xuất dây nịt dây điện ô tô

kelly@komikaya.com — Thu, 20 Feb 2025 02:22:35 +0000

Mẫu số: K23
Tên sản phẩm: nhà sản xuất dây nịt dây điện ô tô
①φ1.5*13 black heat shrinkable sleeve
Đầu nối nam ăng-ten mới (Hai điểm lồi)
②45P plug material PVC black
PE 7144
③φ3.0 black[(7/0.16AS HDPE ID:1.5)*1C transparent+braided wire (16/4/0.1)AS] +PVC outer jacket with Printing: 2.5C-2V 75Ω COAXIAL CABLE
④ Sticker with QR code / running code “Flowing water pull Sagitar + round connector radio test wire XP07V0563R0” synthetic paper (polypropylen) ký tự màu đen trên nền trắng (chiều dài: 100chiều rộng mm: 20MM)
⑤φ5.0*20 Black heat-shrinkable sleeve (the latest REACH requirement)
⑥ Jiashengkang: 11-0201-0249 ∅4.3x14mm cable tie (brass nickel plated)
Jiashengkang: 33-1402-1220 Volkswagen Antenna Female Body Tube Assembly (PBT White + PIN Pin Brass Gold Plated + Terminal Brass Nickel Plated) (With Notches)
⑦Jiashengkang: 22-1402-0019 Volkswagen Antenna Female Buckle (PA66) (Black)
Jiashengkang: 22-1402-0544 Volkswagen Antenna Master Rubber Shell (PA66) (Green)
⑧3M DP-100 NS translucent epoxy resin (6P phthalate)

Yêu cầu:

1. First, the antenna SR lifting weight is required to be at least 5 kg, and it must be maintained for a duration of at least 1 minute.

2. Ngoài ra, the retention force of the wire and antenna terminal should be no less than 5.0 kgf.
Hơn thế nữa, the retention force between the antenna shell and terminal must be at least 3.5 kgf.

BÀI KIỂM TRA:

1.a.100% conduction, short circuit, hở mạch, trật khớp, dielectric withstand voltage test;
b. Insulation resistance: ≥10MΩ, DC 500V, 0.01S;
c. On-resistance: ≤3Ω;
d. Withstand voltage: AC 350V I: 1mA T: 0.1S;
2. Instantaneous short circuit test time ≥ 3 giây;

Bưu kiện:

1. Bundle and Label Products

First, we tie the appropriate number of products into a bundle with PE film. After that, we carefully stack the labels neatly.

2. Pack Products in PE Bags

To begin with, chúng tôi đóng gói sản phẩm trong túi PE trong suốt màu trắng, with the quantity subject to the actual amount. Túi có chiều rộng 324mm và độ dày 0,06mm (Mã hàng: 3040016101). Subsequently, we fold the opening of the bag in half and seal it with transparent glue. Lastly, we affix the Feige customer label in the middle position.

3. Pack Products in Cartons

First of all, we pack the product in a medium-sized carton measuring 48.5 × 34 × 22 cm (H838D, số phần 3010002202). It is important to note that the packing quantity is subject to the actual quantity. Subsequently, once the packing is complete, we then attach the Feige delivery label to the upper left corner of the side of the outer box.

Advantages of Kcables car wire

To begin with, Kcables, as a leading car wire harness manufacturer, offers several key advantages in the automotive cable harness industry:

High-Quality Standards and Testing
Trước hết,Kcables’s wire harnesses undergo rigorous quality control processes, including 100% continuity testing, insulation resistance tests, and voltage withstand tests. As a result, this ensures that their products meet high standards of reliability and safety.
Durability and Environmental Protection
Hơn thế nữa, the harnesses are designed to withstand harsh conditions, including moisture and corrosion. For instance, they are often insulated with materials like PVC, which provide protection against environmental hazards. Consequently, this ensures long-lasting performance and reduces the risk of electrical failures.
Customization and Flexibility
Ngoài ra, Kcables offers tailored cable designs to meet specific customer needs, ensuring that their products fit seamlessly into various automotive applications. Hơn nữa, their harnesses are also flexible, making them easy to install in tight spaces.
Enhanced Safety Features
Kcables’s wire harnesses include features like high-temperature resistance and reliable connections. These features help prevent issues like short-circuiting or fire, ensuring the safety and efficiency of a vehicle’s electrical systems.
Efficient Manufacturing and Delivery
Hơn nữa, the company focuses on efficient manufacturing processes and timely delivery, ensuring that customers receive high-quality products promptly. Consequently, this reliability is essential for both OEM and aftermarket applications.
Professional Support and Service
Ngoài ra, Kcables provides ongoing technical support and professional service, helping customers with installation and troubleshooting. As a result, this level of support ensures that customers can effectively integrate and maintain their wire harnesses.

In summary,these advantages make Kcables automotive wire harnesses a preferred choice for ensuring optimal performance and reliability in automotive electrical systems.

nhà sản xuất dây nịt dây điện ô tô最先出现在dây nịt,dây ô tô, nhà sản xuất cáp công nghiệp。

nhà cung cấp cáp điện ô tô

kelly@komikaya.com — Thu, 20 Feb 2025 01:27:09 +0000

Mẫu số: K22
Tên sản phẩm: nhà cung cấp cáp điện ô tô
①φ6.5 ground ring (TFDJ13-D6 (Fundi)) 16-20 square
②φ9.0 ground ring T belt buckle (ST0602B-9-25-145 (Zhongzhi)) 20-25 square
③φ14*30 black heat shrinkable sleeve
④Tinned copper braided network cable: 48/30/1/0.15-25mm2 (Wall)
⑤180mm mini belt (black) (oval)
⑥PE transparent bag Length: 195*width: 120mm Material thickness: 0.07mm (with a hole in the middle of the seal)

BÀI KIỂM TRA

1.100% test continuity, trật khớp, hở mạch, short circuit.

Bưu kiện

1. We bundle and fix each 20PCS finished product with PE film, and then pack it into a (3040016101) white transparent PE bag. Túi có chiều rộng 324mm và độ dày 0,06mm. Meanwhile, the length of the bag is determined based on the actual demand.

2. We place the products in a blue plastic basket designed for turnover and recycling. The basket measures 54x42x24cm, and its part number is xxx. Ngoài ra, we use an ordinary hollow board for packing. The thickness of the upper and lower flat plates is 0.5mm each, resulting in a total thickness of 5mm. The board is 520mm long and 400mm wide, and it is blue in color.

Remarks

1. All materials must meet the “ROHS” requirements.
2. The tensile force of terminals and wires conforms to the corresponding standards in QC/T29106-2014..
3. The wire rod requires high temperature of 200 °C and low temperature of -50 °C to prevent damage.
4. There should be no damage, burrs, sharp corners, uneven coating, etc. on the surface of the terminal.

Advantages of Kcables car wire

To begin with, Kcables, as a leading automotive electrical cable suppliers, offers several key advantages in the automotive cable harness industry:

High-Quality Standards and Testing
Trước hết,Kcables’s wire harnesses undergo rigorous quality control processes, including 100% continuity testing, insulation resistance tests, and voltage withstand tests. As a result, this ensures that their products meet high standards of reliability and safety.
Durability and Environmental Protection
Hơn thế nữa, the harnesses are designed to withstand harsh conditions, including moisture and corrosion. For instance, they are often insulated with materials like PVC, which provide protection against environmental hazards. Consequently, this ensures long-lasting performance and reduces the risk of electrical failures.
Customization and Flexibility
Ngoài ra, Kcables offers tailored cable designs to meet specific customer needs, ensuring that their products fit seamlessly into various automotive applications. Hơn nữa, their harnesses are also flexible, making them easy to install in tight spaces.
Enhanced Safety Features
Kcables’s wire harnesses include features like high-temperature resistance and reliable connections. These features help prevent issues like short-circuiting or fire, ensuring the safety and efficiency of a vehicle’s electrical systems.
Efficient Manufacturing and Delivery
Hơn nữa, the company focuses on efficient manufacturing processes and timely delivery, ensuring that customers receive high-quality products promptly. Consequently, this reliability is essential for both OEM and aftermarket applications.
Professional Support and Service
Ngoài ra, Kcables provides ongoing technical support and professional service, helping customers with installation and troubleshooting. As a result, this level of support ensures that customers can effectively integrate and maintain their wire harnesses.

In summary,these advantages make Kcables automotive wire harnesses a preferred choice for ensuring optimal performance and reliability in automotive electrical systems.

nhà cung cấp cáp điện ô tô最先出现在dây nịt,dây ô tô, nhà sản xuất cáp công nghiệp。

Nhà cung cấp dây điện ô tô cho ăng-ten ô tô

kelly@komikaya.com — Wed, 19 Feb 2025 10:21:49 +0000

Mẫu số: K21
Tên sản phẩm: Nhà cung cấp dây điện ô tô sáng tạo/Nhà cung cấp dây điện ô tô hàng đầu Trung Quốc
①PE 7144
45Chất liệu phích cắm P PVC đen
φ1,5 * 13 tay áo co nhiệt màu đen
Đầu nối nam ăng-ten mới (Hai điểm lồi)
②φ4.6 đen {[(11/0.16ID trắng TS+HDPE:2.6mm)*1lá nhôm C+]+dây bện (16/3/0.12TS)}+PVC không in
③Với mã QR/mã lưu lượng “mã GSDB: HH50A P/N: J7BJ 14CO23 TRÊN XP01V1170R3” với BIỂU TƯỢNG (polypropylen) ký tự màu đen trên nền trắng (chiều dài: 100chiều rộng mm: 20MM)
④φ5.0*15 Ống co nhiệt màu đen
φ3.0*3 tay áo co nhiệt màu đen
Bộ 5 Ăng Ten Volkswagen Màu Xám Nhạt Mỏ Hàn Pin ID/2.8 Ống Đồng ID/5.0 Ống Cán

Yêu cầu

1. Trọng lượng nâng ăng-ten SR (5KG): ≥ 1 minute.
2. Lực giữ của dây và cực anten: ≥5,0kgf. Lực giữ của vỏ anten và thiết bị đầu cuối: ≥3.5kgf.

BÀI KIỂM TRA

1.Trước hết, về đặc tính điện:

Một. Thiết bị có 100% khả năng dẫn điện. Ngoài ra, nó đã trải qua các cuộc kiểm tra ngắn mạch, hở mạch, trật khớp, and dielectric withstand voltage.

b. Hơn nữa, điện trở cách điện là ≥10MΩ, đo ở DC 500V trong vòng 0.01 seconds.

c. Ngoài ra, the on-resistance is ≤3Ω.

d.Cuối cùng, điện áp chịu được định mức ở mức AC 350V với dòng điện 1mA và thời gian 0.1 giây

2. Hơn thế nữa, the instantaneous short circuit test time is ≥3 seconds.

Bưu kiện

1. We bundle the product with PE film every 25PCS and stack the labels neatly.

2. Ngoài ra, chúng tôi đóng gói sản phẩm trong túi PE trong suốt màu trắng (số lượng dựa trên số tiền thực tế). Túi có chiều rộng 324mm và độ dày 0,06mm (Mã hàng: 3040016101). Chúng tôi gấp lỗ làm đôi và dán kín bằng keo trong suốt, Và sau đó attach the Feige customer label in the middle position.

3. Hơn nữa, chúng tôi đóng gói sản phẩm trong một thùng carton cỡ trung bình (48.53422CM, H838D, số phần 3010002202) (số lượng đóng gói dựa trên số lượng thực tế). Sau khi đóng gói, we affix the Feige customer label to the upper left corner of the side of the outer box.

Ưu điểm của cáp Kcables

Cáp Kcables là sản phẩm hàng đầu Nhà cung cấp dây điện ô tô và là sự lựa chọn ưa thích cho các ứng dụng ô tô, bao gồm dây loa ô tô, cáp ắc quy ô tô, và dây điện ô tô, do có nhiều ưu điểm. Trước hết, sản phẩm của nó đáp ứng tiêu chuẩn chất lượng cao, được chứng nhận ISO9001 và IATF16949, which ensures reliable and consistent performance.

Hơn thế nữa, với tư cách là cấp trên Nhà cung cấp dây điện ô tô, Kcables cung cấp các tùy chọn tùy chỉnh cho dây loa ô tô và dây điện ô tô, cho phép khách hàng chỉ định chiều dài dây, màu sắc, and packaging to meet their unique needs.

Ngoài ra, cáp ắc quy ô tô của họ được thiết kế chú trọng đến độ bền, có tính năng chống mài mòn và khả năng xử lý dòng điện cao, making them suitable for heavy-duty applications.

Hơn nữa, Dây tự động của Kcables được chế tạo để chịu được rung động, nhiệt, và hóa chất, ensuring long-term performance and safety.

Cuối cùng, với sự hiện diện mạnh mẽ tại các thị trường lớn, Kcables cung cấp dịch vụ hậu cần đáng tin cậy và hỗ trợ kỹ thuật liên tục cho khách hàng trên toàn thế giới, củng cố vị trí của mình như một người đáng tin cậy Nhà cung cấp dây điện ô tô.

Nhà cung cấp dây điện ô tô cho ăng-ten ô tô最先出现在dây nịt,dây ô tô, nhà sản xuất cáp công nghiệp。

nhà sản xuất khai thác ô tô cho Ăng-ten vô tuyến ô tô

kelly@komikaya.com — Wed, 19 Feb 2025 00:27:50 +0000

Mẫu số: K19
Tên sản phẩm:automotive cable harness manufacturers for Car Radio Antenna
①Antenna tail female socket (including outer jacket. Inner ring. Copper tube)
Antenna tail female T (Phosphor bronze tinned) thickness: 0.25mm
②45P plug material PVC black (SR in the antenna tail female socket)
③φ3.0 black [(10/0.16TS+PE ID:1.5)*1C white+braided wire (16/3/0.12)TS]+PVC
④ Sticker with QR code/flow code “SAIL ANT CABLE XP01V0832R0” synthetic paper (polypropylen) with black characters on white background (chiều dài: 100mm width: 20mm)
⑤FAKRA female straight connector long body black Z-type 4.0 copper tube five-piece set
⑥φ5.5*15 Black Heat Shrinkable Tube
φ1.0*3 black heat shrinkable sleeve

Yêu cầu

1. Antenna tail (P1 end) and wire retention: ≥3.5kgf.
2. P2 terminal and wireRetention force:: ≥5,0kgf. P2 terminal and plastic shell retention force: ≥3.5kgf.

BÀI KIỂM TRA

1. We conduct several key tests on the product, including 100% conduction, short circuit, hở mạch, trật khớp, and insulation withstand voltage test.

2. Ngoài ra, we measure the insulation resistance to ensure it is ≥10MΩ using a DC 500V voltage for 0.01 seconds.

3. Hơn nữa, we control the on-resistance to be ≤3Ω.

4. Hơn thế nữa, we test the withstand voltage capability at an AC 350V level, with a current of 1mA for a duration of 0.1 seconds.

5. Cuối cùng, we require the instantaneous short circuit test time to be ≥3 seconds.

Bưu kiện

1. First, we tie the appropriate quantities into a bundle and place the labels neatly.

2. Subsequently, we pack the appropriate quantities of finished products in white transparent PE bags, which have a width of 324mm and a thickness of 0.06mm (Mã hàng: 3040016101). The length of the bags is determined by the actual demand. After folding the opening in half, we seal it with transparent glue. Following this step, we stick the Feige customer label in the middle position.

3. Moving on, we pack the product in a medium-sized carton measuring 48.53422CM (H838D, Material No.: 3010002202). The packing quantity is adjusted according to the actual quantity. Lastly, we stick the Feige customer label on the upper left corner of the side of the outer box.

Advantages of Kcables car wire

To begin with, Kcables, as a leading nhà sản xuất khai thác ô tô, offers several key advantages in the automotive cable harness industry:

High-Quality Standards and Testing
Trước hết,Kcables’s wire harnesses undergo rigorous quality control processes, including 100% continuity testing, insulation resistance tests, and voltage withstand tests. As a result, this ensures that their products meet high standards of reliability and safety.
Durability and Environmental Protection
Hơn thế nữa, the harnesses are designed to withstand harsh conditions, including moisture and corrosion. For instance, they are often insulated with materials like PVC, which provide protection against environmental hazards. Consequently, this ensures long-lasting performance and reduces the risk of electrical failures.
Customization and Flexibility
Ngoài ra, Kcables offers tailored cable designs to meet specific customer needs, ensuring that their products fit seamlessly into various automotive applications. Hơn nữa, their harnesses are also flexible, making them easy to install in tight spaces.
Enhanced Safety Features
Kcables’s wire harnesses include features like high-temperature resistance and reliable connections. These features help prevent issues like short-circuiting or fire, ensuring the safety and efficiency of a vehicle’s electrical systems.
Efficient Manufacturing and Delivery
Hơn nữa, the company focuses on efficient manufacturing processes and timely delivery, ensuring that customers receive high-quality products promptly. Consequently, this reliability is essential for both OEM and aftermarket applications.
Professional Support and Service
Ngoài ra, Kcables provides ongoing technical support and professional service, helping customers with installation and troubleshooting. As a result, this level of support ensures that customers can effectively integrate and maintain their wire harnesses.

In summary,these advantages make Kcables automotive wire harnesses a preferred choice for ensuring optimal performance and reliability in automotive electrical systems.

nhà sản xuất khai thác ô tô cho Ăng-ten vô tuyến ô tô最先出现在dây nịt,dây ô tô, nhà sản xuất cáp công nghiệp。

nhà sản xuất dây nịt ô tô

kelly@komikaya.com — Sat, 15 Feb 2025 10:00:57 +0000

Mẫu số: K19
Product name: nhà sản xuất dây nịt ô tô
①Volkswagen Antenna Twin Male connector (8.0 Pitch) White 5.0 Single Copper Tube Five-piece Set
②φ5.5*15 black Heat Shrinkable Tube
φ1.0*3 black heat shrinkable sleeve
③φ4.6 black {[(11/0.16ID trắng TS+HDPE:2.6mm)*1lá nhôm C+] + dây bện(16/3/0.12TS)}+PVC không in
④ Sticker with barcode “Volkswagen Radio Adapter Cable (Pioneer IVs) VW RADIO CABLE XP01V0812R0” polypropylene film with black characters on white background/black body (chiều dài: 120mm width: 20mm)
⑤45P plug material PVC black
PE 7144
φ9.5 Automotive Antenna Male T Brass Nickel Plated (Material Thickness:0.3mm)

Yêu cầu

Trước hết, the retention force of the wire and antenna terminal is ≥5.0KG, while the retention force of the antenna plastic shell and terminal is ≥3.5KG.
Ngoài ra, the antenna SR lifting weight is tested at 5KG, with a 1-minute lifting weight test.

BÀI KIỂM TRA

Advantages of Kcables car wire

To begin with, Kcables, as a leading automotive wire manufacturer, offers several key advantages in the automotive cable harness industry:

High-Quality Standards and Testing
Trước hết,Kcables’s wire harnesses undergo rigorous quality control processes, including 100% continuity testing, insulation resistance tests, and voltage withstand tests. As a result, this ensures that their products meet high standards of reliability and safety.
Durability and Environmental Protection
Hơn thế nữa, the harnesses are designed to withstand harsh conditions, including moisture and corrosion. For instance, they are often insulated with materials like PVC, which provide protection against environmental hazards. Consequently, this ensures long-lasting performance and reduces the risk of electrical failures.
Customization and Flexibility
Ngoài ra, Kcables offers tailored cable designs to meet specific customer needs, ensuring that their products fit seamlessly into various automotive applications. Hơn nữa, their harnesses are also flexible, making them easy to install in tight spaces.
Enhanced Safety Features
Kcables’s wire harnesses include features like high-temperature resistance and reliable connections. These features help prevent issues like short-circuiting or fire, ensuring the safety and efficiency of a vehicle’s electrical systems.
Efficient Manufacturing and Delivery
Hơn nữa, the company focuses on efficient manufacturing processes and timely delivery, ensuring that customers receive high-quality products promptly. Consequently, this reliability is essential for both OEM and aftermarket applications.
Professional Support and Service
Ngoài ra, Kcables provides ongoing technical support and professional service, helping customers with installation and troubleshooting. As a result, this level of support ensures that customers can effectively integrate and maintain their wire harnesses.

In summary,these advantages make Kcables automotive wire harnesses a preferred choice for ensuring optimal performance and reliability in automotive electrical systems.

nhà sản xuất dây nịt ô tô最先出现在dây nịt,dây ô tô, nhà sản xuất cáp công nghiệp。

nhà sản xuất khai thác dây ô tô tùy chỉnh

kelly@komikaya.com — Fri, 14 Feb 2025 15:58:33 +0000

Mẫu số: K18
Tên sản phẩm: custom nhà sản xuất dây nịt ô tô
①FAKRA double female straight connector 8.0 pitch, white 5.0 copper tube six-piece set (Huaxing Tongda)
②φ5.5*15 Black Heat Shrinkable Tube
φ1.0*3 black heat shrinkable sleeve
③ Sticker with QR code / running code “Fox dual radio cable XP01V0739R0” synthetic paper (polypropylen) ký tự màu đen trên nền trắng (chiều dài: 100mm width: 20mm)
④φ4.6 black {[(11/0.16ID trắng TS+HDPE:2.6mm)*1lá nhôm C+]+dây bện (16/3/0.12TS)}+PVC without printing L=140mm
⑤FAKRA male connector type B white 5.0 copper tube four-piece set (Huaxing Tongda)
⑥FAKRA male connector Z type black 5.0 copper tube four-piece set (Huaxing Tongda)

Yêu cầu

1. Lực giữ của dây và cực anten: ≥5.0KG. Lực giữ của vỏ anten và thiết bị đầu cuối: ≥3.5KG.

BÀI KIỂM TRA

1. a.100% conduction, short circuit, hở mạch, trật khớp, insulation withstand voltage test;
b. Insulation resistance: ≥10MΩ, DC 500V, 0.01S;
c. On resistance: ≤3Ω;
d. Withstand voltage: AC 350V I: 1mA T: 0.1S;
2. Instantaneous short circuit test time ≥ 3 seconds.

Advantages of Kcables car wire

Kcables, as a leading automotive wire manufacturer, offers several key advantages in the automotive cable harness industry:

High-Quality Standards and Testing
Kcables’s wire harnesses undergo rigorous quality control processes, including 100% continuity testing, insulation resistance tests, and voltage withstand tests. This ensures that their products meet high standards of reliability and safety.
Durability and Environmental Protection
The harnesses are designed to withstand harsh conditions, including moisture and corrosion. They are often insulated with materials like PVC, which provide protection against environmental hazards. This ensures long-lasting performance and reduced risk of electrical failures.
Customization and Flexibility
Kcables offers tailored cable designs to meet specific customer needs, ensuring that their products fit seamlessly into various automotive applications. Their harnesses are also flexible, making them easy to install in tight spaces.
Enhanced Safety Features
Kcables’s wire harnesses include features like high-temperature resistance and reliable connections, which help prevent issues like short-circuiting or fire. This is crucial for maintaining the safety and efficiency of a vehicle’s electrical systems.
Efficient Manufacturing and Delivery
The company focuses on efficient manufacturing processes and timely delivery, ensuring that customers receive high-quality products promptly. This reliability is essential for both OEM and aftermarket applications.
Professional Support and Service
Kcables provides ongoing technical support and professional service, helping customers with installation and troubleshooting. This level of support ensures that customers can effectively integrate and maintain their wire harnesses.

These advantages make Kcables automotive wire harnesses a preferred choice for ensuring optimal performance and reliability in automotive electrical systems.

nhà sản xuất khai thác dây ô tô tùy chỉnh最先出现在dây nịt,dây ô tô, nhà sản xuất cáp công nghiệp。

Bulk automotive wire for car CDC positioning

kelly@komikaya.com — Fri, 14 Feb 2025 08:55:37 +0000

Mẫu số: K17
Tên sản phẩm: dây ô tô/bulk automotive wire
①KWD-12P male connector 90 degrees black foot length 3.0
②The sticker “QC PASS” Xiaoyinlong silver bottom with green characters Black body oval (chiều dài: 10mm width: 8mm)
PE 7144
45Chất liệu phích cắm P PVC đen
③φ0.8*15 Black heat shrinkable sleeve
φ0.8*10 Black heat shrinkable sleeve
φ1.5*5 Transparent heat shrinkable sleeve
φ1.5*8 Transparent heat shrinkable sleeve
φ2.0*8 Black heat shrinkable sleeve
φ2.5*8 black heat shrinkable sleeve
④φ6.0 black [MD2.6 black (11/0.12AS SR-PVC ID: 0.75*2C red and white+SP (20/0.10AS)+PVC)+MD1.7 black (11/0.12AS SR-PVC ID: 0.75 yellow+SP(20/0.10AS)+PVC)+(11/0.16AS SR-PVC ID:0.95*3C green orange purple)] + aluminum foil+ground wire(11/0.16TS)+braided(16/5/ 0.1AS)+PVC
⑤45P plug material PVC black
⑥φ6.0*35 Black heat shrinkable sleeve
φ0.8*31 black heat shrinkable sleeve
φ0.8*22 black heat shrinkable sleeve
φ2.0*15 black heat shrinkable sleeve
φ2.5*15 black heat shrinkable sleeve
⑦SAN male T
SAN-12P HG (white)

BÀI KIỂM TRA

1.a.100% test continuity, short circuit, hở mạch, trật khớp, Insulation withstand voltage test.
b. Insulation resistance: ≥20MΩ, DC 500V, 0.01 giây;
c. On-resistance: ≤3Ω;
d. Withstand voltage: AC 350V I: 1mA T: 1 second;
2. Instantaneous short circuit test time ≥ 5 giây;

Bưu kiện:

1.We wrap each set of 10 pieces of the product with a polyethylene (PE) film, specifically covering the P2 end to provide protection. Then, we place bundles of 50 finished products into a white, transparent PE bag that measures 324 mm in width and 0.06 mm in thickness (Mã hàng: 3040016101). The length of the bag is determined by the actual required length. We fold the open end of the bag over and seal it with transparent adhesive. After installation, we affix the Feige customer label in the center position.

2.We package the product in a medium-sized corrugated carton measuring 48.5 cm × 34 cm × 22 cm (model H838D, Mã hàng: 3010002202). The quantity per carton is based on the actual packing quantity. Sau khi đóng gói, we apply the Feige customer label to the upper left corner of the side of the outer box.

Bulk automotive wire for car CDC positioning最先出现在dây nịt,dây ô tô, nhà sản xuất cáp công nghiệp。